Compatible male threaded QD for vl3n-m10-16s?

Fittings, nozzles, quick-disconnects, speed controllers, power supplies, & everything else...
Water Pistol Grunt
Water Pistol Grunt
Posts: 1
Joined: Tue May 31, 2016 7:20 am

Compatible male threaded QD for vl3n-m10-16s?

Postby scbesterman » Tue May 31, 2016 9:15 am


Need a few male (threaded) QD's but having trouble figuring out compatibility.

Have a bunch of VL3N-F10-16s ( ... in-x-5-8in ) and am looking for some extra VL3N-MG ( ... aded-g-1-4 ) threaded male fittings.

Since the VL3N-MG is long there another fitting that would be the same (G 1/4 BSPP (parallel) thread male fitting for screwing directly into a water block or other component) but would work with my existing VL3N-F10-16S females?

Would prefer finding fittings that will work with my current parts rather than buying all new equipment.


Rain Maker
Rain Maker
Posts: 1183
Joined: Tue Sep 16, 2008 10:34 am
Location: Edmonton, Canada

Re: Compatible male threaded QD for vl3n-m10-16s?

Postby Izerous » Thu Jun 02, 2016 8:26 am

To my knowledge the VL3N is only compatible with the VL3N series. Each new series the way they connect to each other is different. Be it size or method.

Side note: Personally I don't like putting threaded QDC fittings into blocks. The reason being the force that is required to push them together, I don't like putting that force needlessly into the CPU/GPU etc... on a radiator that is a different story.
Corsair 800D
2xPMP-450S > Amd FX8370 > Asus CH4-EX > AMD 6990 > AMD 6990 > 2x1080 rads > return
32GB Ram

Return to “Fittings, Nozzles, Quick-Disconnects, Misc.”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest