Page 1 of 2

How to connect RAM-33?

Posted: Tue Jul 28, 2009 2:49 pm
by aggie5857
Does anyone have any useful pics of a water loop using the RAM-33 water blocks? I seem to be having a hard time visualizing how these would be connected together if you had 6 of them. Unlike the RAM-35 which have different connectors that you can incorporate, these don't have anything. I guess all you can do is connect them with regular and elbow connectors.

They don't even have a manual the the RAM-35's do where they show you very clearly how to connect them in series, parallel, together or skipping slots, and in 2,3,4 or more sockets.

Re: RAM-33

Posted: Tue Jul 28, 2009 4:54 pm
by Izerous
I apologize in advance for the crude drawings. Depending on flow rates etc and what they are hooked up to something along the lines of the drawings should work.

Edit: Images assuming your doing something like 90' elbows between them kind of similar to the origional ram-30 coolers pathing.

Edit: alternatively could go 6 parallel paths :).

Re: RAM-33

Posted: Wed Jul 29, 2009 8:28 pm
by aggie5857
don't really like all that crossing but you did give me an idea. You need a hell of a lot of 90's though. Thanks for the reply and if anyone has pics please share.

Re: RAM-33

Posted: Thu Jul 30, 2009 10:11 am
by [Koolance] Tim
It can get a bit messy if you're using more than 2 blocks. We will have new connectors for this product in August.

Re: RAM-33

Posted: Thu Jul 30, 2009 1:53 pm
by aggie5857
Thanks for the info Tim, can't wait to see them.

Re: RAM-33

Posted: Thu Aug 13, 2009 9:47 am
by JuanPabloCuervo
i have:
32-Bit OS that needs 4GB ram.
4x 1GB ram kignston kvr1333d3n9/1g
4x ram-33
fanless ERM-2K3U
13mm tubing for:
cpu-350ac
2x chc-122
MSI Eclipse X58 SLi
6mm tubing for:
4x Thermaltake Aquabay M4
Thermaltake W2
etc...

the configuration i did was:
Parallel Ram-33 water cooling usign:

--->13mm nozzle Koolance spl-xgy4a to 4x [6mm nozzles-->ram-33-->AquabayM4-->koolance spl-xgy4a]--->13mm
..................................................[6mm nozzles-->ram-33-->AquabayM4-->koolance spl-xgy4a]
..................................................[6mm nozzles-->ram-33-->AquabayM4-->koolance spl-xgy4a]
..................................................[6mm nozzles-->ram-33-->AquabayM4-->koolance spl-xgy4a]
2x 13mm nozzles "1x pair"
http://www.koolance.com/water-cooling/p ... uct_id=469
Image
two of these splitter/joiner:
http://www.koolance.com/water-cooling/p ... uct_id=733
Image
16x 6mm nozzles "8x pair"
http://www.koolance.com/water-cooling/p ... uct_id=468
Image

4x Ram-33
http://www.koolance.com/water-cooling/p ... uct_id=860
Image
4x Thermaltake Aquabay M4
http://www.overclockercafe.com/Reviews/ ... 4/pg3.html
http://www.techpowerup.com/reviews/Ther ... /M4/6.html
ImageImageImage
ImageImageImage

Image
im dreaming to fill this case with Thermaltake Aquabay M4 + 2TB HDDs!
the Thermaltake M9 case/chasis is too small. not enough depth.
Image
Image
Image

Re: RAM-33

Posted: Thu Aug 13, 2009 10:14 am
by JuanPabloCuervo
[Koolance] Tim wrote:It can get a bit messy if you're using more than 2 blocks.

-1.

what koolance needs its an optional large heavy closed back steel/aluminium/copper heat sink for PMP-450.
that eats the noise & also the heat.

Re: RAM-33

Posted: Fri Sep 25, 2009 11:00 am
by [Koolance] Tim
RAM-33 connectors were launched Aug 19th: http://www.koolance.com/water-cooling/p ... uct_id=907

+1

Re: How to connect RAM-33?

Posted: Mon Oct 05, 2009 11:24 pm
by Bravoexo
Hope this helps....this is how I got mine installed. (2x RAM-33's)

Image

A wider shot

Image

Re: How to connect RAM-33?

Posted: Fri Oct 23, 2009 5:47 am
by markpg28
Hi, how do you find these for flow & temps? do they make a difference to temps?
is it worth changing RAM-35s to RAM-33?