TMS-200 issue at startup

Koolance TMS Software & Hardware Interface...
Water Balloon Grenadier
Water Balloon Grenadier
Posts: 59
Joined: Thu Apr 09, 2009 5:17 am

Re: TMS-200 issue at startup

Postby GoNz0 » Thu Apr 21, 2011 7:40 am

you will need to RMA it, you can shove some blue tak into the speaker hole to shut it up without voiding the warranty.

Water Pistol Grunt
Water Pistol Grunt
Posts: 11
Joined: Wed Aug 18, 2010 10:38 am

Re: TMS-200 issue at startup

Postby Fredthenuke » Fri Apr 22, 2011 1:35 pm

RMA'ing it is a waste of my time and theirs... The issue is software related not hardware... Mine alarms the entire time during startup about 90% of the time - once communication is established it stops. As has dozens of other customers... We have yet to see an RMA fix the issue for more than a few weeks. It always returns. Adding an alarm delay until comms are established or a user selectable time period expires would fix this issue (so it's up to the user to decide how much risk to take on bootup before comms is established in case of a pump failure).

Return to “Software”

Who is online

Users browsing this forum: No registered users and 1 guest