EK-DCP 2.2 12V DC Pump and TMS-200

Koolance TMS Software & Hardware Interface...
Water Pistol Grunt
Water Pistol Grunt
Posts: 5
Joined: Thu Dec 02, 2010 6:19 am

EK-DCP 2.2 12V DC Pump and TMS-200

Postby David » Sun Jan 16, 2011 9:26 am

I use the EK-DCP 2.2 12V DC Pump with your TMS-200 controller for the past a few weeks and have one issue: (SW 2.2.18)

The pump speed sometimes stuck with one a constant rpm. You can adjust the voltage within the software, however the the hardware output voltage does not change at all. It seems that the voltage of the controller stuck with the last memory and refuses to change when the software tells it to do so.

Water Balloon Grenadier
Water Balloon Grenadier
Posts: 59
Joined: Thu Apr 09, 2009 5:17 am

Re: EK-DCP 2.2 12V DC Pump and TMS-200

Postby GoNz0 » Sun Jan 23, 2011 4:41 pm

its a software bug thats not been fixed in the latest release, its not your pump. I have made them aware but not heard anything.

Return to “Software”

Who is online

Users browsing this forum: No registered users and 1 guest