Koolance TMS-205

Koolance TMS Software & Hardware Interface...
Water Pistol Grunt
Water Pistol Grunt
Posts: 1
Joined: Mon Jun 18, 2012 1:49 am

Koolance TMS-205

Postby Shaunbrown » Mon Jun 18, 2012 1:51 am

Hello all :)

I have just recieved my package from TheKoolRoom with all my goodies.

After going through it all i looked through the manual for the Koolance: TMS-205 and noticed that it actually states that is only has compatibility with koolance pumps. This seems very strange to me as the pump is controlled via a 3 pin connection.

Myself i have one of these pumps:
http://www.pccasegear.com/index.php?mai ... s_id=19787

and for refeance here is the Koolance: TMS-205 controller from their site:

http://koolance.com/index.php?route=pro ... ct_id=1178

The pump i have does have a 4 pin connector but just like a 4 pin fan it is able to be plugged into a 3 pin connector (even if one side has to be cut off it doesnt matter as i understand that the 4th cable is just for RPM feed back correct?)

Any way if someone could please assist that would be great :D

Return to “Software”

Who is online

Users browsing this forum: No registered users and 1 guest