Page 3 of 4

Re: tms 205 software newest version

Posted: Thu Aug 01, 2013 8:44 am
by [Koolance] Todd
Hi Mike,

Can you post / email me screenshots of the messages?

Re: tms 205 software newest version

Posted: Mon Aug 05, 2013 6:50 pm
by Mikesnow
[Koolance] Todd wrote:Hi Mike,

Can you post / email me screenshots of the messages?

here is a screenshot
Image

and here is the text it has in the text box.

Code: Select all

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Runtime.InteropServices.ExternalException (0x80004005): A generic error occurred in GDI+.
   at System.Drawing.Graphics.Clear(Color color)
   at WinFrmsApp.main1.uGrapDrawing(Boolean change) in C:\Documents and Settings\dhkim\바탕 화면\TMS205\C#4\source\TMS205Light\TMS205Light\TMS205Light\main1.cs:line 1205
   at WinFrmsApp.main1.timeGraph_Tick(Object sender, EventArgs e) in C:\Documents and Settings\dhkim\바탕 화면\TMS205\C#4\source\TMS205Light\TMS205Light\TMS205Light\main1.cs:line 1174
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1008 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
TMS205Beta
    Assembly Version: 1.0.0.0
    Win32 Version: 3.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/Koolance/TMS%20205%20Light%20v3.0.0%20Beta/TMS205Beta.exe
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1002 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1009 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1009 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
xCtlProgressBars
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/Koolance/TMS%20205%20Light%20v3.0.0%20Beta/xCtlProgressBars.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.




Re: tms 205 software newest version

Posted: Thu Aug 22, 2013 2:53 am
by Mikesnow
Was that helpful at all? Do you need more of these posted? I assume they all say the same thing, but I could be wrong. If you need more posted for a larger sample I can post more.

Re: tms 205 software newest version

Posted: Thu Aug 22, 2013 2:18 pm
by [Koolance] Todd
We don't need more screenshots but I can use a couple more of the exception texts and compare them.

I don't have an update on this specific bug but our developers have been working on some internal betas. I think we're closer to releasing another update (within 2 weeks, hopefully sooner). I'll ask about the status of this bug specifically.

You see the error randomly? When launching other programs? When launching TMS?

You can try updating / reinstalling your .NET framework, but I'm not sure if that will fix it. We haven't heard of other users with those exceptions yet.

Re: tms 205 software newest version

Posted: Fri Aug 23, 2013 3:56 pm
by Admin
A new beta version has been posted: http://koolance.com/software

v3.5.6 BETA Updates:
Added fan hysteresis for auto mode.
Added °C/°F and LPM/GPM unit toggle.
Added right-click menu option to front window graph.
Increased name length of temperature sensors, fans, and flow meters.
Changed default log folder to local user \documents\tms-205.
Fixed several COM connection and software crashing issues.

Re: tms 205 software newest version

Posted: Tue Aug 27, 2013 7:47 am
by Mikesnow
Haven't had the error message since this new beta, also I ran the .net installer tool and checked for .net updates and haven't gotten any errors since.

Re: tms 205 software newest version

Posted: Thu Aug 29, 2013 4:56 pm
by [Koolance] Todd
Thanks Mike! Good to hear! Please keep us posted if other issues arise.

Re: tms 205 software newest version

Posted: Sat Aug 31, 2013 12:12 pm
by clebermarinho
Hi,

My system is with a weird behavior. When I start the software, a red led on the board turns on. But, for each minute, the led turns off and the board beeps loudly until, after 5 seconds, the led turns on again. If I close the software, the led stays on for 20 seconds when turn off and the beep starts. If I start the software again, the system goes to the same behavior described before. If the board is beeping, a computer restart doesn´t stop the beep. In this case, only shuting down the computer stops the annoying beep.

So, could you help me put the TMS system to run correctly?

My computer configuration is:

Hardware:

- Intel DX58SO mainboard with Koolance MRV-100, MRV-40 and CHC-22;
- 12GB of memory with 3x RAM-33;
- Intel 990X processor with CPU-370;
- 2x NVIDIA GTX580 in SLI with VID-NX580;
- 2x HX-CU720V with 4x FAN-12025HBK and VL3N-F10B;
- 2x INS-FM17N;
- RP-401X2 with 2x PMP-400;
- TMS-205 with TMS-EB205;
- 10mm tubing with LIQ-702BU-B;
- 5x SEN-AP008G.
- OCZ Vector 250GB SSD for SO and applications;
- Seagate Barracuda ST3000DM001 3TB HDD for data;
- PQI MLC 256GB SSD for virtual machines;
- Microsoft Keyboard 3000 USB;
- Microsoft Standard Wireless Optical Mouse USB.

Software:

- Windows 7 Ultimate x64 in english and updated;
- TMS-205 v3.5.6 beta.

Re: tms 205 software newest version

Posted: Sat Aug 31, 2013 8:41 pm
by Mikesnow
ok got another error.

same as the pic before, heres the copied code.

Code: Select all

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Runtime.InteropServices.ExternalException (0x80004005): A generic error occurred in GDI+.
   at System.Drawing.Graphics.Clear(Color color)
   at WinFrmsApp.main1.uGrapDrawing(Boolean change) in C:\Documents and Settings\dhkim\바탕 화면\TMS205\C#4\source\TMS205Light\TMS205Light\TMS205Light\main1.cs:line 1227
   at WinFrmsApp.main1.timeGraph_Tick(Object sender, EventArgs e) in C:\Documents and Settings\dhkim\바탕 화면\TMS205\C#4\source\TMS205Light\TMS205Light\TMS205Light\main1.cs:line 1196
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1008 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
TMS205Beta
    Assembly Version: 1.0.0.0
    Win32 Version: 3.0.5.6
    CodeBase: file:///C:/Program%20Files%20(x86)/Koolance/TMS-205%20v3.5.6%20Beta/TMS205Beta.exe
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1002 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
xCtlProgressBars
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/Koolance/TMS-205%20v3.5.6%20Beta/xCtlProgressBars.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.



Re: tms 205 software newest version

Posted: Wed Sep 04, 2013 1:48 pm
by [Koolance] Todd
Thanks Mike. Are the errors just as frequent after moving to 3.5.6? Are you on Windows 8 or 7? You uninstalled the old version before installing the new one first?

You could try installing TMS on a new Windows installation. It's not ideal, but I'm guessing it would fix the error. We haven't seen this message from any other customers yet.