Postby mramsden » Sun Sep 08, 2013 5:56 pm
I'm glad to see work progressing on this ..
When I first start up v3.5.6 beta, it has the same manual and auto options for the pumps as for the fans, but after setting it up, when I click on Pumps to adjust, I now get a screen which is to profile the pumps.
How do I get the pump control back?
I noted in the settings file there are a bunch of settings for the fans auto settings, but not for the pump auto settings.
This control of the pumps works properly in the previous software, version 2. It automatically ramps up the pumps depending on the chosen temp sensor.
Requests:
- for those of us without pump rpm availability, would be nice to be able to plot voltage vs flow, which is the whole point of having flow meters.
- when deselecting a channel, remove the display line? 1 have 8 active sensors, but it shows 10 slots, even though 9, 10 are deactivated.
- even though I have only 2 fan sets connected, it wants to show 6 fan graphs. I have to manually set the 4 unused ones to zero. Should have a way to select the used channels for display.
..Mike