Page 1 of 1

MVR-100

Posted: Tue Aug 23, 2016 8:23 am
by Enslaved
Hi there,

unfortunately, i lost the two flat-headed mounting screws wich are needed to put my MVR-100 and my heat transfer plate together.
What kind of screws where they? I tried to find them at local stores here but without any luck so far.

Re: MVR-100

Posted: Tue Aug 23, 2016 12:35 pm
by Izerous
According to the following diagram it looks like you should be looking at #6-32 flat head screws, unfortunately it doesn't specify the length but it's probably in the 15mm range based on the other measurements.

https://koolance.com/files/products/dia ... 100_d0.gif

Re: MVR-100

Posted: Wed Aug 24, 2016 12:29 am
by Enslaved
thanks alot for the reply!
i'm trying to get a pair of those now. i'll report back, thanks!

Re: MVR-100

Posted: Wed Aug 24, 2016 1:31 am
by Enslaved
Well.. ok...

seems like nobody here in Germany has those screws... Only Metric system ones.. uahhhhh

Re: MVR-100

Posted: Thu Aug 25, 2016 8:31 am
by Enslaved
Update for all those who MAY have the same problem like me in the future:

I ordererd a bag of screws "6-32X3/4" UNC ANSI B18.6.3" via eBay and they fit perfectly. Now i can re-build my water cooling solution.

Thanks "Izerous" for bringing me up the right way!

Re: MVR-100

Posted: Tue Aug 30, 2016 9:55 am
by Izerous
Being a Canadian Metric and Imperial parts and tools are common due to how close we are to the US. I could definitely see imperial based parts being uncommon stock in other countries. I'm glad you got it resolved.