Page 1 of 1

CTR-CD12 + INS-FM17N + SEN-AP008PB. OK?

Posted: Thu Dec 01, 2011 7:18 pm
by booya
Hello, I want to install CTR-CD12 Fan Controller and connect to it one temp. sensor SEN-AP008PB or SEN-AP008G and one INS-FM17N Flow Meter.

Also I need to connect with this thing 9 fans (each 0.09A).

So I need to use three 4-Fan Wiring Harness.

After that, i think this controller will be able to change rpm of all 9 fans, based on temp. sensor readout (only one sensor). For example, if we will have T of water ~30C, it will be low rpm. The higher temp, the higher rpm at fans.

This that possible?

Thx.

Re: CTR-CD12 + INS-FM17N + SEN-AP008PB. OK?

Posted: Tue Dec 06, 2011 11:06 am
by AgentX250
The math says you'd be ok since the fans would only being pulling .81 amps, I cant say whether the controller would work out how you expect but it would be able to handle the fans and the meters.

Re: CTR-CD12 + INS-FM17N + SEN-AP008PB. OK?

Posted: Tue Dec 06, 2011 12:21 pm
by Izerous
I would double check your fan's specs (0.09A) but yes as Agent mentioned you should be ok.