Video block alignment question

Video card/GPU water cooling blocks...
Water Pistol Grunt
Water Pistol Grunt
Posts: 15
Joined: Sun Jul 25, 2010 1:00 am
Location: Redondo Beach, CA

Video block alignment question

Postby eisenb11 » Sun Jan 10, 2016 2:04 pm

Hi there,

Currently have 2x VID-NXTTN blocks connected via a CNT-VDB1 connecting block. Thinking of replacing one of the VID-NXTTN blocks with a VID-NX980 block and still want to use the CNT-VDB1, if possible.

Looks like the holes will still align from the pictures, but not sure if it does in reality as I don't have the specs.

Can you confirm if these holes align?

Intel i7 930, Asus Rampage III Extreme, 6 GB Corsair Dominator DDR3, 2x 8800 GTX XXX, 2x OCZ 250 GB SSD, Seagate 1.5 TB HDD

Koolance ERM-2K3UCU, Koolance CPU-360, 2x Danger Den DD-8800GTX

Rain Maker
Rain Maker
Posts: 1185
Joined: Tue Sep 16, 2008 10:34 am
Location: Edmonton, Canada

Re: Video block alignment question

Postby Izerous » Mon Jan 11, 2016 11:19 am

You will probably need confirmation from an actual Koolance rep but I believe all CNT-VDB1 compatible blocks were designed so the holes would line up with each other even across models.

Edit: please note the NXTTN and the NX980 are for different card support. A NX980 won't necessarily just mount up to your existing cards that already have the NXTTN's installed.
Corsair 800D
2xPMP-450S > Amd FX8370 > Asus CH4-EX > AMD 6990 > AMD 6990 > 2x1080 rads > return
32GB Ram

Return to “Water Blocks - Video”

Who is online

Users browsing this forum: No registered users and 1 guest